Data security

Data security or data protection is the process of securing digital information to protect it from online threats. Data security or protection means protecting digital data, such as those in a database, from destructive forces and from the unwanted actions of unauthorized users, such as a cyberattack or a data breach. Data security protects computer hardware, software, storage devices, and the data of user devices. Data security also protects the data of organizations, companies and administrative controls. Data security guarantees the protection of individual data, such as identity documents and bank data, and protects against unauthorized access, theft and loss of individual data. Data security also protects data breaches that occurs in companies and industries. Good security measures in industries reduce the probability of data breaches, and employees can rely on the company with their data and private information to be kept secured while companies can continue to maintain a stable reputation. The CIA Triad (Confidentiality, Integrity, and Availability) is what is used to practice what an information security is required to follow. Confidentiality, protects information from being accessed by unauthorized persons. Integrity, makes sure data is trustworthy; and Availability, meaning that data can be accessed by approved users when it is needed; are three goals for data security. Non-repudiation in data security definition, is a device/service that shows where the data originated from and the proof of integrity. == Technologies == === Disk encryption === Disk encryption refers to encryption technology that encrypts data on a hard disk drive. It takes data from a storage device and coverts it into an unreadable format. Disk encryption typically takes form in either software (see disk encryption software) or hardware (see disk encryption hardware) which can be used together. Disk encryption is often referred to as on-the-fly encryption (OTFE) or transparent encryption. Full disk encryption encrypts each individual sector of a disk volume. Files and user data are encrypted to hinder unauthorized users from accessing without a decryption key. A diversifier permits a plaintext of a specific disk sector to be encrypted into different ciphertexts, which does not require additional storage, such as an initialization vector (IV) or message authentication code (MAC). === Software versus hardware-based mechanisms for protecting data === Software-based security solutions encrypt the data to protect it from theft. However, a malicious program or a hacker could corrupt the data to make it unrecoverable, making the system unusable. Hardware-based security solutions prevent read and write access to data, which provides very strong protection against tampering and unauthorized access. Hardware-based security or assisted computer security offers an alternative to software-only computer security. Security tokens such as those using PKCS#11 or a mobile phone may be more secure due to the physical access required in order to be compromised. Access is enabled only when the token is connected and the correct PIN is entered (see two-factor authentication). However, dongles can be used by anyone who can gain physical access to it. Newer technologies in hardware-based security solve this problem by offering full proof of security for data. Working off hardware-based security: A hardware device allows a user to log in, log out and set different levels through manual actions. Many devices use biometric technology to prevent malicious users from logging in, logging out, and changing privilege levels. The current state of a user of the device is read by controllers in peripheral devices such as hard disks. Illegal access by a malicious user or a malicious program is interrupted based on the current state of a user by hard disk and DVD controllers making illegal access to data impossible. Hardware-based access control is more secure than the protection provided by the operating systems as operating systems are vulnerable to malicious attacks by viruses and hackers. The data on hard disks can be corrupted after malicious access is obtained. With hardware-based protection, the software cannot manipulate the user privilege levels. A hacker or a malicious program cannot gain access to secure data protected by hardware or perform unauthorized privileged operations. This assumption is broken only if the hardware itself is malicious or contains a backdoor. The hardware protects the operating system image and file system privileges from being tampered with. Therefore, a completely secure system can be created using a combination of hardware-based security and secure system administration policies. === Backups === Backup is the process of reproducing copies of essential data and storing in a separate, secured place. It is used to ensure data that is lost can be recovered from another source. Backups contains a minimum of one copy of the data that requires preservation. It is considered essential to keep a backup of any data in most industries and the process is recommended for any files of importance to a user. There are 3 types of backups; full backups, incremental backups, and differential backups. Full backups secure all data from a production system, such as a server, database, or other connected data source. It is impossible to lose all data in a full backup if a breach or corruption were to occur. Full backups require a significantly large amount of time to back up and may be time-consuming taking hours to days to complete. Incremental backups only secures changed data since last backup. While all backups are done in full backups, incremental backups only save data that is recently or frequently changed. Incremental backups require lower storage costs making it a prominent solution for growing datasets. === Data Privacy === Data privacy (or information privacy) is the right for individual's data to be secured to obstruct the use of unauthorized access. It gives individuals control over their data and how it can be shared to third parties. The U.S Privacy Protection Law (see Privacy laws of the United States) requires organizations to inform individuals of how their data is collected and when a data breach occurs. By implementing an encryption, it ensures that private data is unreadable to cybercriminals. === Data masking === Data masking of structured data is the process of obscuring (masking) specific data within a database table or cell to ensure that data security is maintained and sensitive information is not exposed to unauthorized personnel. This may include masking the data from users (for example so banking customer representatives can only see the last four digits of a customer's national identity number), developers (who need real production data to test new software releases but should not be able to see sensitive financial data), outsourcing vendors, etc. Data masking is a form of encryption, as it obscures data by modifying particular letters and numbers to keep data concealed and protected from potential hackers. The individual that has access to the code that decrypts the replaced characters are the only ones that can uncover the data. === Data erasure === Data erasure (or data deletion, data destruction) is a method of software-based overwriting that permanently clears all electronic data residing on a hard drive or other digital media to ensure that no sensitive data is lost when an asset is retired or reused. Article 17: Right to be Forgotten states that users have the right to permanently remove all of their private information from their old devices/services to give people more control over their data. Users are able to switch between devices efficiently. == Threats == === Malware === Malware (or malicious software) is designed to destroy, corrupt or gain unauthorized access to a computer for the purpose of stealing, or destroying data. Hackers who use malware typically utilize many types of malware, which includes computer virus, computer worms, ransomware, spyware and Trojan horse to create a vast system of disruption and cause easy data theft. One of the victims of the vast system of disruption includes healthcare workers, who are targeted by compromised systems by infections and then having their data attacked. === Phishing === Phishing is a type of scam that allows hackers to hoax people using psychological and social engineering (using human emotions such as their trust and fear) tactics into giving personal data through emails and messages, and install computer viruses if the individual were to click on a malicious link unknowingly. Attackers are able to create websites that are very similar to original websites, which makes it difficult to detect a fake website, causing individuals to fall for giving in information. Phishing attackers use human emotion to exploit them, such as making them feel fear, urgency, sympathy with the message

VieON

VieON is an mobile application for television and video on demand provided by VieON Joint Stock Company (formerly Dzones), a subsidiary of DatVietVAC Media and Entertainment Group in Vietnam. The app was launched in 2020, featuring over 140 domestic and international television channels, original series, popular entertainment programs known nationwide, top-tier sports events and live streaming of major events. Additionally, VieON provides animated films, television series and television programs from various countries such as South Korea and China. == History == The application was planned for development in 2016, with the cooperation of strategic consulting partner BCG Digital Ventures from the United States. Prior to 2020, VieON was a rebranded version of VTVcab ON, a product managed by Vietnam Cable Television Corporation (VTVCab) and DatVietVAC. On June 15, 2020, after four years of research and testing, the new version of VieON was officially released by DatVietVAC Group, with Vie Channel Joint Stock Company as the business entity and service provider. This is considered the official launch date of the application. On July 21, 2023, VieON transitioned its business operations and service provision to VieON Joint Stock Company. In January 2024, VieON officially launched its global version, VieON Global, targeting Vietnamese users living abroad. == Background == According to Kantar Media Vietnam, up to 84% of Vietnamese people aged 15–54 use social media daily, and in a similar survey by Nielsen, 90% of respondents said they watch live TV weekly. Additionally, according to research organization Muvi, Southeast Asia's OTT market revenue could reach $650 million annually starting next year. Understanding this, DatVietVAC Group has planned to research and develop an OTT application, even though the Vietnamese market already has some major players such as FPT Play and the international giant Netflix. Additionally, DatVietVAC does not hide its ambition to make this application the number one entertainment channel for Vietnamese people.

Conceptual dependency theory

Conceptual dependency theory is a model of natural language understanding used in artificial intelligence systems. Roger Schank at Stanford University introduced the model in 1969, in the early days of artificial intelligence. This model was extensively used by Schank's students at Yale University such as Robert Wilensky, Wendy Lehnert, and Janet Kolodner. Schank developed the model to represent knowledge for natural language input into computers. Partly influenced by the work of Sydney Lamb, his goal was to make the meaning independent of the words used in the input, i.e. two sentences identical in meaning would have a single representation. The system was also intended to draw logical inferences. The model uses the following basic representational tokens: real world objects, each with some attributes. real world actions, each with attributes times locations A set of conceptual transitions then act on this representation, e.g. an ATRANS is used to represent a transfer such as "give" or "take" while a PTRANS is used to act on locations such as "move" or "go". An MTRANS represents mental acts such as "tell", etc. A sentence such as "John gave a book to Mary" is then represented as the action of an ATRANS on two real world objects, John and Mary.

Construction of t-norms

In mathematics, t-norms are a special kind of binary operations on the real unit interval [0, 1]. Various constructions of t-norms, either by explicit definition or by transformation from previously known functions, provide a plenitude of examples and classes of t-norms. This is important, e.g., for finding counter-examples or supplying t-norms with particular properties for use in engineering applications of fuzzy logic. The main ways of construction of t-norms include using generators, defining parametric classes of t-norms, rotations, or ordinal sums of t-norms. Relevant background can be found in the article on t-norms. == Generators of t-norms == The method of constructing t-norms by generators consists in using a unary function (generator) to transform some known binary function (most often, addition or multiplication) into a t-norm. In order to allow using non-bijective generators, which do not have the inverse function, the following notion of pseudo-inverse function is employed: Let f: [a, b] → [c, d] be a monotone function between two closed subintervals of extended real line. The pseudo-inverse function to f is the function f (−1): [c, d] → [a, b] defined as f ( − 1 ) ( y ) = { sup { x ∈ [ a , b ] ∣ f ( x ) < y } for f non-decreasing sup { x ∈ [ a , b ] ∣ f ( x ) > y } for f non-increasing. {\displaystyle f^{(-1)}(y)={\begin{cases}\sup\{x\in [a,b]\mid f(x)y\}&{\text{for }}f{\text{ non-increasing.}}\end{cases}}} === Additive generators === The construction of t-norms by additive generators is based on the following theorem: Let f: [0, 1] → [0, +∞] be a strictly decreasing function such that f(1) = 0 and f(x) + f(y) is in the range of f or in [f(0+), +∞] for all x, y in [0, 1]. Then the function T: [0, 1]2 → [0, 1] defined as T(x, y) = f (-1)(f(x) + f(y)) is a t-norm. Alternatively, one may avoid using the notion of pseudo-inverse function by having T ( x , y ) = f − 1 ( min ( f ( 0 + ) , f ( x ) + f ( y ) ) ) {\displaystyle T(x,y)=f^{-1}\left(\min \left(f(0^{+}),f(x)+f(y)\right)\right)} . The corresponding residuum can then be expressed as ( x ⇒ y ) = f − 1 ( max ( 0 , f ( y ) − f ( x ) ) ) {\displaystyle (x\Rightarrow y)=f^{-1}\left(\max \left(0,f(y)-f(x)\right)\right)} . And the biresiduum as ( x ⇔ y ) = f − 1 ( | f ( x ) − f ( y ) | ) {\displaystyle (x\Leftrightarrow y)=f^{-1}\left(\left|f(x)-f(y)\right|\right)} . If a t-norm T results from the latter construction by a function f which is right-continuous in 0, then f is called an additive generator of T. Examples: The function f(x) = 1 – x for x in [0, 1] is an additive generator of the Łukasiewicz t-norm. The function f defined as f(x) = –log(x) if 0 < x ≤ 1 and f(0) = +∞ is an additive generator of the product t-norm. The function f defined as f(x) = 2 – x if 0 ≤ x < 1 and f(1) = 0 is an additive generator of the drastic t-norm. Basic properties of additive generators are summarized by the following theorem: Let f: [0, 1] → [0, +∞] be an additive generator of a t-norm T. Then: T is an Archimedean t-norm. T is continuous if and only if f is continuous. T is strictly monotone if and only if f(0) = +∞. Each element of (0, 1) is a nilpotent element of T if and only if f(0) < +∞. The multiple of f by a positive constant is also an additive generator of T. T has no non-trivial idempotents. (Consequently, e.g., the minimum t-norm has no additive generator.) === Multiplicative generators === The isomorphism between addition on [0, +∞] and multiplication on [0, 1] by the logarithm and the exponential function allow two-way transformations between additive and multiplicative generators of a t-norm. If f is an additive generator of a t-norm T, then the function h: [0, 1] → [0, 1] defined as h(x) = e−f (x) is a multiplicative generator of T, that is, a function h such that h is strictly increasing h(1) = 1 h(x) · h(y) is in the range of h or equal to 0 or h(0+) for all x, y in [0, 1] h is right-continuous in 0 T(x, y) = h (−1)(h(x) · h(y)). Vice versa, if h is a multiplicative generator of T, then f: [0, 1] → [0, +∞] defined by f(x) = −log(h(x)) is an additive generator of T. == Parametric classes of t-norms == Many families of related t-norms can be defined by an explicit formula depending on a parameter p. This section lists the best known parameterized families of t-norms. The following definitions will be used in the list: A family of t-norms Tp parameterized by p is increasing if Tp(x, y) ≤ Tq(x, y) for all x, y in [0, 1] whenever p ≤ q (similarly for decreasing and strictly increasing or decreasing). A family of t-norms Tp is continuous with respect to the parameter p if lim p → p 0 T p = T p 0 {\displaystyle \lim _{p\to p_{0}}T_{p}=T_{p_{0}}} for all values p0 of the parameter. === Schweizer–Sklar t-norms === The family of Schweizer–Sklar t-norms, introduced by Berthold Schweizer and Abe Sklar in the early 1960s, is given by the parametric definition T p S S ( x , y ) = { T min ( x , y ) if p = − ∞ ( x p + y p − 1 ) 1 / p if − ∞ < p < 0 T p r o d ( x , y ) if p = 0 ( max ( 0 , x p + y p − 1 ) ) 1 / p if 0 < p < + ∞ T D ( x , y ) if p = + ∞ . {\displaystyle T_{p}^{\mathrm {SS} }(x,y)={\begin{cases}T_{\min }(x,y)&{\text{if }}p=-\infty \\(x^{p}+y^{p}-1)^{1/p}&{\text{if }}-\infty −∞ Continuous if and only if p < +∞ Strict if and only if −∞ < p ≤ 0 (for p = −1 it is the Hamacher product) Nilpotent if and only if 0 < p < +∞ (for p = 1 it is the Łukasiewicz t-norm). The family is strictly decreasing for p ≥ 0 and continuous with respect to p in [−∞, +∞]. An additive generator for T p S S {\displaystyle T_{p}^{\mathrm {SS} }} for −∞ < p < +∞ is f p S S ( x ) = { − log ⁡ x if p = 0 1 − x p p otherwise. {\displaystyle f_{p}^{\mathrm {SS} }(x)={\begin{cases}-\log x&{\text{if }}p=0\\{\frac {1-x^{p}}{p}}&{\text{otherwise.}}\end{cases}}} === Hamacher t-norms === The family of Hamacher t-norms, introduced by Horst Hamacher in the late 1970s, is given by the following parametric definition for 0 ≤ p ≤ +∞: T p H ( x , y ) = { T D ( x , y ) if p = + ∞ 0 if p = x = y = 0 x y p + ( 1 − p ) ( x + y − x y ) otherwise. {\displaystyle T_{p}^{\mathrm {H} }(x,y)={\begin{cases}T_{\mathrm {D} }(x,y)&{\text{if }}p=+\infty \\0&{\text{if }}p=x=y=0\\{\frac {xy}{p+(1-p)(x+y-xy)}}&{\text{otherwise.}}\end{cases}}} The t-norm T 0 H {\displaystyle T_{0}^{\mathrm {H} }} is called the Hamacher product. Hamacher t-norms are the only t-norms which are rational functions. The Hamacher t-norm T p H {\displaystyle T_{p}^{\mathrm {H} }} is strict if and only if p < +∞ (for p = 1 it is the product t-norm). The family is strictly decreasing and continuous with respect to p. An additive generator of T p H {\displaystyle T_{p}^{\mathrm {H} }} for p < +∞ is f p H ( x ) = { 1 − x x if p = 0 log ⁡ p + ( 1 − p ) x x otherwise. {\displaystyle f_{p}^{\mathrm {H} }(x)={\begin{cases}{\frac {1-x}{x}}&{\text{if }}p=0\\\log {\frac {p+(1-p)x}{x}}&{\text{otherwise.}}\end{cases}}} === Frank t-norms === The family of Frank t-norms, introduced by M.J. Frank in the late 1970s, is given by the parametric definition for 0 ≤ p ≤ +∞ as follows: T p F ( x , y ) = { T m i n ( x , y ) if p = 0 T p r o d ( x , y ) if p = 1 T L u k ( x , y ) if p = + ∞ log p ⁡ ( 1 + ( p x − 1 ) ( p y − 1 ) p − 1 ) otherwise. {\displaystyle T_{p}^{\mathrm {F} }(x,y)={\begin{cases}T_{\mathrm {min} }(x,y)&{\text{if }}p=0\\T_{\mathrm {prod} }(x,y)&{\text{if }}p=1\\T_{\mathrm {Luk} }(x,y)&{\text{if }}p=+\infty \\\log _{p}\left(1+{\frac {(p^{x}-1)(p^{y}-1)}{p-1}}\right)&{\text{otherwise.}}\end{cases}}} The Frank t-norm T p F {\displaystyle T_{p}^{\mathrm {F} }} is strict if p < +∞. The family is strictly decreasing and continuous with respect to p. An additive generator for T p F {\displaystyle T_{p}^{\mathrm {F} }} is f p F ( x ) = { − log ⁡ x if p = 1 1 − x if p = + ∞ log ⁡ p − 1 p x − 1 otherwise. {\displaystyle f_{p}^{\mathrm {F} }(x)={\begin{cases}-\log x&{\text{if }}p=1\\1-x&{\text{if }}p=+\infty \\\log {\frac {p-1}{p^{x}-1}}&{\text{otherwise.}}\end{cases}}} === Yager t-norms === The family of Yager t-norms, introduced in the early 1980s by Ronald R. Yager, is given for 0 ≤ p ≤ +∞ by T p Y ( x , y ) = { T D ( x , y ) if p = 0 max ( 0 , 1 − ( ( 1 − x ) p + ( 1 − y ) p ) 1 / p ) if 0 < p < + ∞ T m i n ( x , y ) if p = + ∞ {\displaystyle T_{p}^{\mathrm {Y} }(x,y)={\begin{cases}T_{\mathrm {D} }(x,y)&{\text{if }}p=0\\\max \left(0,1-((1-x)^{p}+(1-y)^{p})^{1/p}\right)&{\text{if }}0

Distributed artificial intelligence

Distributed Artificial Intelligence (DAI) (also called Decentralized Artificial Intelligence) is a melding of artificial intelligence with distributed computing. From artificial intelligence comes the theory and technology for constructing or analyzing an intelligent system. But where artificial intelligence uses psychology as a source of ideas, inspiration, and metaphor, DAI uses sociology, economics, and management science for inspiration. Where the focus of artificial intelligence is on the individual, the focus of DAI is on the group. Distributed computing provides the computational substrate on which this group focus can occur. Using techniques from artificial intelligence, communication theory, control theory, and interaction theory, it produces a cooperative solution to problems by a decentralized group of computational entities (agents). DAI is closely related to and a predecessor of the field of multi-agent systems. They are distinguished generally by multi-agent systems being open, where the entities might arise from different interests and have individual goals, and distributed artificial-intelligence systems, where the entities have common goals. There are numerous applications and tools. == Definition == Distributed Artificial Intelligence (DAI) is an approach to solving complex learning, planning, and decision-making problems. It is embarrassingly parallel, thus able to exploit large scale computation and spatial distribution of computing resources. These properties allow it to solve problems that require the processing of very large data sets. DAI systems consist of autonomous learning processing nodes (agents), that are distributed, often at a very large scale. DAI nodes can act independently, and partial solutions are integrated by communication between nodes, often asynchronously. By virtue of their scale, DAI systems are robust and elastic, and by necessity, loosely coupled. Furthermore, DAI systems are built to be adaptive to changes in the problem definition or underlying data sets due to the scale and difficulty in redeployment. DAI systems do not require all the relevant data to be aggregated in a single location, in contrast to monolithic or centralized Artificial Intelligence systems, which have tightly coupled and geographically close processing nodes. Therefore, DAI systems often operate on sub-samples or hashed impressions of very large datasets. In addition, the source dataset may change or be updated during the course of the execution of a DAI system. == Development == In 1975 distributed artificial intelligence emerged as a subfield of artificial intelligence that dealt with interactions of intelligent agents. As a scientific discipline, it progressed through a series of workshops in the USA (International Workshop on Distributed Artificial Intelligence, held in 13 editions from 1978 - 1994), Europe (Workshop on Modelling Autonomous Agents in a Multi-Agent World https://link.springer.com/conference/maamaw), and Asia (Multi-Agent and Cooperative Computation Workshop (MACC) https://sites.google.com/view/sig-macc/macc-workshop?authuser=0). Distributed artificial intelligence systems were conceived as a group of intelligent entities, called agents, that interacted by cooperation, by coexistence, or by competition. DAI is categorized into multi-agent systems and distributed problem solving. In multi-agent systems the main focus is how agents coordinate their knowledge and activities. For distributed problem solving the major focus is how the problem is decomposed and the solutions are synthesized. == Goals == The objectives of Distributed Artificial Intelligence are to solve the reasoning, planning, learning and perception problems of artificial intelligence, especially if they require large data, by distributing the problem to autonomous processing nodes (agents). To reach the objective, DAI requires: A distributed system with robust and elastic computation on unreliable and failing resources that are loosely coupled Coordination of the actions and communication of the nodes Subsamples of large data sets and online machine learning There are many reasons for wanting to distribute intelligence or cope with multi-agent systems. Mainstream problems in DAI research include the following: Parallel problem solving: mainly deals with how classic artificial intelligence concepts can be modified, so that multiprocessor systems and clusters of computers can be used to speed up calculation. Distributed problem solving (DPS): the concept of agent, autonomous entities that can communicate with each other, was developed to serve as an abstraction for developing DPS systems. See below for further details. Multi-Agent Based Simulation (MABS): a branch of DAI that builds the foundation for simulations that need to analyze not only phenomena at macro level but also at micro level, as it is in many social simulation scenarios. == Approaches == Two types of DAI has emerged: In Multi-agent systems agents coordinate their knowledge and activities and reason about the processes of coordination. Agents are physical or virtual entities that can act, perceive their environment, and communicate with other agents. An agent is autonomous and has skills to achieve goals. The agents change the state of their environment by their actions. There are a number of different coordination techniques. In distributed problem solving the work is divided among nodes and the knowledge is shared. The main concerns are task decomposition and synthesis of the knowledge and solutions. DAI can apply a bottom-up approach to AI, similar to the subsumption architecture as well as the traditional top-down approach of AI. In addition, DAI can also be a vehicle for emergence. === Challenges === The challenges in Distributed AI are: How to carry out communication and interaction of agents and which communication language or protocols should be used. How to ensure the coherency of agents. How to synthesise the results among 'intelligent agents' group by formulation, description, decomposition and allocation. == Applications and tools == Areas where DAI have been applied are: Electronic commerce, e.g. for trading strategies the DAI system learns financial trading rules from subsamples of very large samples of financial data Networks, e.g. in telecommunications the DAI system controls the cooperative resources in a WLAN network Routing, e.g. model vehicle flow in transport networks Scheduling, e.g. flow shop scheduling where the resource management entity ensures local optimization and cooperation for global and local consistency Search engines, e.g. in LLM federated search like Ithy where document retrieval and analysis are distributed to DAI agents before aggregation Multi-Agent systems, e.g. artificial life, the study of simulated life Electric power systems, e.g. Condition Monitoring Multi-Agent System (COMMAS) applied to transformer condition monitoring, and IntelliTEAM II Automatic Restoration System DAI integration in tools has included: ECStar is a distributed rule-based learning system. == Agents == === Systems: Agents and multi-agents === Notion of Agents: Agents can be described as distinct entities with standard boundaries and interfaces designed for problem solving. Notion of Multi-Agents: Multi-Agent system is defined as a network of agents which are loosely coupled working as a single entity like society for problem solving that an individual agent cannot solve. === Software agents === The key concept used in DPS and MABS is the abstraction called software agents. An agent is a virtual (or physical) autonomous entity that has an understanding of its environment and acts upon it. An agent is usually able to communicate with other agents in the same system to achieve a common goal, that one agent alone could not achieve. This communication system uses an agent communication language. A first classification that is useful is to divide agents into: reactive agent – A reactive agent is not much more than an automaton that receives input, processes it and produces an output. deliberative agent – A deliberative agent in contrast should have an internal view of its environment and is able to follow its own plans. hybrid agent – A hybrid agent is a mixture of reactive and deliberative, that follows its own plans, but also sometimes directly reacts to external events without deliberation. Well-recognized agent architectures that describe how an agent is internally structured are: ASMO (emergence of distributed modules) BDI (Believe Desire Intention, a general architecture that describes how plans are made) InterRAP (A three-layer architecture, with a reactive, a deliberative and a social layer) PECS (Physics, Emotion, Cognition, Social, describes how those four parts influences the agents behavior). Soar (a rule-based approach)

Artificial intimacy

Artificial intimacy is a form of human-AI interaction in which an individual will form social connections, emotional bonds, or intimate relationships with various forms of artificial intelligence, including chatbots, virtual assistants, and other artificial entities. Artificially intimate relationships include not only romances, but parasocial relationships with virtual AI characters and the use of griefbots trained on a dead or otherwise lost individual. Artificial intimacy can arise because humans are prone to anthropomorphism. Responses from these AI models are often designed to simulate human interaction. Individuals experiencing artificial intimacy may exhibit attachment, love and commitment to certain AI models, akin to the bonds typically shared between humans. == Causes == === Perceived responsiveness === Robin Dunbar famously proposed that due to emergence of larger groups of humans, vocal communication and language in humans evolved to replace grooming as a means of bonding, arguing that language was a more efficient way to maintain and strengthen social bonds across wider social settings and networks. Further research in this field leads many psychologists to agree that social cognition, affiliative bonding and language in humans are deeply connected. The interpersonal model of intimacy considers communication to be key in affiliative bonding, suggesting that intimacy develops and deepens through open communication between partners in relationship. Specifically, when individuals communicate emotions and perceive their partner as responsive and caring, feelings of closeness and connection are enhanced, building intimacy. Social penetration theory also aligns with the idea of communication being central to intimacy, by explaining how interpersonal relationships develop through gradual increases in self-disclosure. When the benefits of emotional bonding outweigh the costs of vulnerability, individuals will partake in self-disclosure, opening up to one another. Thereby, the literature can be used to provide a proximate explanation for the emergence of artificial intimacy to understand how the phenomenon occurs. Artificial entities are able to mimic interpersonal communication between humans, which in turn can simulate sensations of intimacy within human users though a perceived sense of responsiveness. The relationship between human and AI does not come with the cost of vulnerability or social rejection, which may make self-disclosure easier than with other humans. Altogether, these factors may lead to the experience of anthropomorphism and formation of affiliative relationships. Skjuve et al's interview study on Replika chatbot users further aligns with this explanation, finding that users' perception of chatbots as "accepting, understanding and non-judgmental" facilitated relationship development between the AI and users, and the act of self-disclosure possibly strengthened relationships. Another study on Replika users' reviews and survey results found users perceived chatbots as emotional supportive companions. This evidence further suggests that the perception of artificial entities as capable of empathy and responsiveness in communication facilitate the development of intimate relationships between users and AI. === Loneliness and coping with negative emotions === Research has suggested that humans evolved social bonds as a result of evolutionary pressures that favored cooperation, information exchange and transmission, and group living. Many studies stress the presence of social bonds to be important for human living: research by Baumeister and Leary suggests that humans have a basic psychological need to form and maintain "strong, stable interpersonal relationships", and that a lack of social bonds or sense of belonging leads to negative psychological and physical outcomes. Eisenberger et al's study on the neuroimaging of brain activity suggests that human brains process social rejection and exclusion similarly to physical pain. Furthermore, Song et al's study found that lonely individuals tend to seek more connections in mediated environments, such as online platforms like Facebook. This was suggested to be as a means to reduce their offline loneliness from a lack of in-person interaction, while also fulfilling a need to communicate. Leading on from this, an ultimate explanation for why humans seek the perceived sense of connection from artificial intimacy is to fulfil an evolutionary need for bonding and belonging. Xie et al's study found loneliness to be a driving factor in chatbot interaction. Herbener and Damholdt's study on Danish high school students found that students who sought emotional support or engaged in reciprocal conversations with chatbots were significantly more lonely than their peers, perceived themselves as having less social support, and used the chatbots to cope with negative emotions. The aforementioned notion that chatbots were perceived to have a positive effect on users' negative emotions is also further supported by other studies. Skjuve et al's study found that chatbot relationships may have a positive effect on users' wellbeing. De Freitas et al ran several studies on the effect of chatbots on loneliness, consistently finding evidence suggesting that interaction with chatbots reduces loneliness in users: It was found that existing chatbot users used AI to alleviate loneliness, having an AI companion consistently reduced loneliness over the course of a week, and reductions in loneliness could be explained by chatbot performance—and specifically whether it was able to make users feel heard. Overall the evidence suggests an innate need for bonding evokes feelings of loneliness in users, who turn to artificial intimacy as a low-cost method alleviate these emotions. While many users report positive experiences, some researchers caution that pursuing artificial intimacy may lead to reduced social motivation, social substitution effects, withdrawal from real-life relationships and difficulty discerning reality from fantasy, which may increase longer-term loneliness and isolation. The long-term psychological and societal impacts remain under active investigation.

AI-assisted targeting in the Gaza Strip

As part of the Gaza war, the Israel Defense Forces (IDF) have used artificial intelligence to rapidly and automatically perform much of the process of determining what to bomb. Israel has greatly expanded the bombing of the Gaza Strip, which in previous wars had been limited by the Israeli Air Force running out of targets. These tools include the Gospel, an AI which automatically reviews surveillance data looking for buildings, equipment and people thought to belong to the enemy, and upon finding them, recommends bombing targets to a human analyst who may then decide whether to pass it along to the field. Another is Lavender, an "AI-powered database" which lists tens of thousands of Palestinian men linked by AI to Hamas or Palestinian Islamic Jihad, and which is also used for target recommendation. Critics have argued the use of these AI tools puts civilians at risk, blurs accountability, and results in militarily disproportionate violence in violation of international humanitarian law. == The Gospel == Israel uses an AI system dubbed "Habsora", "the Gospel", to determine which targets the Israeli Air Force would bomb. It automatically provides a targeting recommendation to a human analyst, who decides whether to pass it along to soldiers in the field. The recommendations can be anything from individual fighters, rocket launchers, Hamas command posts, to private homes of suspected Hamas or Islamic Jihad members. AI can process military intelligence far faster than humans. Retired Lt Gen. Aviv Kohavi, head of the IDF until 2023, stated that the system could produce 100 bombing targets in Gaza a day, with real-time recommendations which ones to attack, where human analysts might produce 50 a year. A lecturer interviewed by NPR estimated these figures as 50–100 targets in 300 days for 20 intelligence officers, and 200 targets within 10–12 days for the Gospel. === Technological background === The Gospel uses machine learning, where an AI is tasked with identifying commonalities in vast amounts of data (e.g. scans of cancerous tissue, photos of a facial expression, surveillance of Hamas members identified by human analysts), then looking for those commonalities in new material. What information the Gospel uses is not known, but it is thought to combine surveillance data from diverse sources in enormous amounts. Recommendations are based on pattern-matching. A person with enough similarities to other people labeled as enemy combatants may be labelled a combatant themselves. Regarding the suitability of AIs for the task, NPR cited Heidy Khlaaf, engineering director of AI Assurance at the technology security firm Trail of Bits, as saying "AI algorithms are notoriously flawed with high error rates observed across applications that require precision, accuracy, and safety." Bianca Baggiarini, lecturer at the Australian National University's Strategic and Defence Studies Centre wrote AIs are "more effective in predictable environments where concepts are objective, reasonably stable, and internally consistent." She contrasted this with telling the difference between a combatant and non-combatant, which even humans frequently can't do. Khlaaf went on to point out that such a system's decisions depend entirely on the data it's trained on, and are not based on reasoning, factual evidence or causation, but solely on statistical probability. === Operation === The IAF ran out of targets to strike in the 2014 war and 2021 crisis. In an interview on France 24, investigative journalist Yuval Abraham of +972 Magazine stated that to maintain military pressure, and due to political pressure to continue the war, the military would bomb the same places twice. Since then, the integration of AI tools has significantly sped up the selection of targets. In early November, the IDF stated more than 12,000 targets in Gaza had been identified by the target administration division that uses the Gospel. NPR wrote on December 14 that it was unclear how many targets from the Gospel had been acted upon, but that the Israeli military said it was currently striking as many as 250 targets a day. The bombing, too, has intensified to what the December 14 article called an astonishing pace: the Israeli military stated at the time it had struck more than 22,000 targets inside Gaza, at a daily rate more than double that of the 2021 conflict, more than 3,500 of them since the collapse of the truce on December 1. Early in the offensive the head of the Air Force stated his forces only struck military targets, but added: "We are not being surgical." Once a recommendation is accepted, another AI, Fire Factory, cuts assembling the attack down from hours to minutes by calculating munition loads, prioritizing and assigning targets to aircraft and drones, and proposing a schedule, according to a pre-war Bloomberg article that described such AI tools as tailored for a military confrontation and proxy war with Iran. One change that The Guardian noted is that since senior Hamas leaders disappear into tunnels at the start of an offensive, systems such as the Gospel have allowed the IDF to locate and attack a much larger pool of more junior Hamas operatives. It cited an official who worked on targeting decisions in previous Gaza operations as saying that while the homes of junior Hamas members had previously not been targeted for bombing, the official believes the houses of suspected Hamas operatives were now targeted regardless of rank. In the France 24 interview, Abraham, of +972 Magazine, characterized this as enabling the systematization of dropping a 2000 lb bomb into a home to kill one person and everybody around them, something that had previously been done to a very small group of senior Hamas leaders. NPR cited a report by +972 Magazine and its sister publication Local Call as asserting the system is being used to manufacture targets so that Israeli military forces can continue to bombard Gaza at an enormous rate, punishing the general Palestinian population. NPR noted it had not verified this; it was unclear how many targets are being generated by AI alone, but there had been a substantial increase in targeting, with an enormous civilian toll. In principle, the combination of a computer's speed to identify opportunities and a human's judgment to evaluate them can enable more precise attacks and fewer civilian casualties. Israeli military and media have emphasized this capacity to minimize harm to non-combatants. Richard Moyes, researcher and head of the NGO Article 36, pointed to "the widespread flattening of an urban area with heavy explosive weapons" to question these claims, while Lucy Suchman, professor emeritus at Lancaster University, described the bombing as "aimed at maximum devastation of the Gaza Strip". The Guardian wrote that when a strike was authorized on private homes of those identified as Hamas or Islamic Jihad operatives, target researchers knew in advance the expected number of civilians killed, each target had a file containing a collateral damage score stipulating how many civilians were likely to be killed in a strike, and according to a senior Israeli military source, operatives use a "very accurate" measurement of the rate of civilians evacuating a building shortly before a strike. "We use an algorithm to evaluate how many civilians are remaining. It gives us a green, yellow, red, like a traffic signal." ==== 2021 use ==== Kohavi compared the target division using the Gospel to a machine and stated that once the machine was activated in the war of May 2021, it generated 100 targets a day, with half of them being attacked, in contrast with 50 targets in Gaza per year beforehand. Approximately 200 targets came from the Gospel out of the 1,500 targets Israel struck in Gaza in the war, including both static and moving targets according to the military. The Jewish Institute for National Security of America's after action report identified an issue, stating the system had data on what was a target, but lacked data on what wasn't. The system depends entirely on training data, and intel that human analysts had examined and deemed didn't constitute a target had been discarded, risking bias. The vice president expressed his hopes this had since been rectified. === Organization === The Gospel is used by the military's target administration division (or Directorate of Targets or Targeting Directorate), which was formed in 2019 in the IDF's intelligence directorate to address the air force running out of targets to bomb, and which Kohavi described as "powered by AI capabilities" and including hundreds of officers of soldiers. In addition to its wartime role, The Guardian wrote it'd helped the IDF build a database of between 30,000 and 40,000 suspected militants in recent years, and that systems such as the Gospel had played a critical role in building lists of individuals authorized to be assassinated. The Gospel was developed by Unit 8200 of the Israeli Intelligence C